SEMA Preview: ASI's 800hp Tetsu GTR Bentley Continental GT

What does SEMA mean to you? For most of us, it's a place for the country's top tuners to show their wares to a power-hungry public. But the dark side of SEMA never ceases to rear its ugly head, and further proof will be available at the Toyo booth where the Tetsu GTR Bentley Continental GT will be displayed.

The unholy brainchild of Japanese tuner ASI features a custom carbon fiber wide-body kit that makes ASMA's unfortunate creations look demure in comparison. The two-tone paint scheme... uhhh... compliments the massive haunches, deep side skirts and GT-style wing, while 22-inch blingalicious rollers prove that chrome is still in high demand... unfortunately.

According to Modified Luxury and Exotics, only 29 Tetsu GTRs will be produced, each putting out over 800 hp. We'll be on hand to provide live shots of the other five vehicles featured at the Toyo stand, assuming our camera lens doesn't crack when we zoom in on the GTR's gaudy fascia.

[Source: Modified Luxury and Exotics]

Rendered Speculation: how will you tune the Camaro?

Click above for a high resolution image

With sales of the 2010 Chevy Camaro starting in the first quarter of 2009, it's inevitable that a variety of tuner versions will be popping up left and right. Deviant Art member Morfiuss decided that was too long to wait and beat everyone to the punch with his photoshopped rendition of a Hamann Camaro. We think he did a stellar job, penning in a new front fascia, side skirts, flared fenders, 20-inch rims, and gullwing doors that depict what Hamann would probably do if they got their hands on a Camaro. It's not likely to happen, but it does beg the question -- how would you tune the Camaro? Would you build a Euro-style version similar to the Hamann, or how about an all-out drag racer set for ten second time slips? Our pick? A street/track version styled after the Mark Donohue's Penske Camaro that was so dominant in the Trans-Am series in the late 1960's.

[Source: DeviantArt.com via MuscleCars.at]

Pump it up: Titan Air Jack blows itself up with exhaust

If you've ever had the need to raise one side of your car, truck, RV or trailer a couple feet off the ground, the Titan Exhaust Air Jack is there to give you a lift. Quite simply, the jack is nothing more than a heavy-duty balloon inflated by the exhaust gas of your own vehicle. Once the deflated bag is placed under the vehicle, the Air Jack's inflation hose is connected to the vehicle's exhaust pipe. The engine is started and hot gasses are forced into the bag until the woven PVC-coated polyester bag lifts a vehicle a full 30 inches off the ground, which is plenty of height to get the wheels off the ground for most vehicles. With prices starting around $120, the device offers several advantages over traditional jacks. First, it can be used on soft surfaces (mud, sand, or snow) where other jacks just don't work. Second, it easily lifts one whole side of the vehicle at once, saving tons of time. Best of all, the low pressure bag doesn't require placement on normal jacking points so you more freedom to lift where you want and then place jack stands exactly where you need them. The military and emergency services have apparently been using jacks of this type for years, so the idea isn't just full of hot air.

GT-RR.com: Bringing GT-R performance parts to the people

Nissan maintains that the GT-R is mechanized perfection that could never be improved upon (never mind that V-Spec over there), but that's not going to stop owners from attempting to extract every last bit of performance from Nissan's super coupe.

Enter GT-RR.com, an online distributor specializing in the importation of top shelf kit from Japan. Ben Schaffer, president of Bespoke Ventures, one of the men behind Bulletproof Automotive and blogger at The Real JDM, is behind the new site, bringing almost a decade of tuning experience and over 100 aftermarket components to GT-R owners here in the States. The site is currently in BETA testing, but that doesn't mean that GT-R drivers have to leave "good enough" alone.

GT-RR currently offers a nice assortment of parts – from seats to suspension components and exhausts to wheels – and while Schaffer and his team are currently farming out installation work to other reputable shops in the L.A. area, he's not ruling out a dedicated location for work on the GT-R. According to Schaffer, "Our sole focus is on what we do best. Fast and highly accurate logistics and distribution from Japan to both local tuning shops and directly to the end users." Although the aftermarket, along with the rest of the auto industry, is experiencing a downturn, there's little doubt that GT-R owners will be looking for something to turn up the wick on their rides. Thankfully, GT-RR will be there to answer the call.

eBay find of the day: BTTF SriLorean

The seller states he's not really sure what this car is worth. Here's our estimate: it's worth even less than a regular '89 Scirocco with 123,000 miles. Why? Because it's been molested into a Delorean imposter. Not just any Delorean, either, but the Back To The Future Delorean, which so many people feel compelled to recreate as a rolling manifestation of their overdeveloped love for a movie prop. Don't get us wrong, the BTTF DMC's masterful design has had astounding resonance with the public, becoming a real icon of its time. It's just that while the original design by Andrew Probert and Ron Cobb was something new, rehashing it endlessly for twenty-five years has gotten tiresome.

With that out of our system, let's go on to say that the seller has a sense of humor about this car. It was used to promote a primary school play, +1 for kickin' it with the kiddies, and there's obviously a lot of effort here. It's also heartwarming that the mods were perpetrated on a somewhat more common Scirocco, versus a rarer Delorean. The Flux capacitor and time circuits have not been tested, according to the seller, so caveat emptor. If it actually works, we'd love to go back and whisper in VW's ear to build more Sciroccos, and do likewise with Johnny Z, too. Bids currently stand at £156 with the reserve not met, so you're not yet OUTATIME. Thanks for the tip, Tim!

Edo Competition revisits the Maserati MC12

There is no shortage in the automotive world of tuners endeavoring
to squeeze extra performance out of already devastatingly fast cars.
But Edo Competition is a breed apart. For those still unfamiliar, check
out our previous posts on Edo's customized Lamborghini LP640, Ferrari 599 and Porsche Carrera GT,
which demonstrate that, in Edo's blue eyes, perfection is relative and
can always be improved upon. Their latest venture was to crank up the Ferrari Enzo, and have once again turned their attention to its sister supercar, the Maserati MC12.

This, of course, isn't the first time the German tuning house has
taken their hammers to the uber-Trident, having cranked out the MC12 XX and cranked up the MC12 Corsa.
A bit more subdued than its predecessors, the latest MC12 package aims
to improve the super-exotic's power-to-weight ratio, which came as
stock a bit lower than that of the Enzo due to more bodywork. Edo has
managed to trim 220 lbs of extra weight from the Maserati, while
increasing power by 70 cavalli to 700hp. Edo has also fitted
a host of modified components from the variable exhaust and adjustable
rear wing to the retuned suspension and new wheel package. Visual
changes were kept to a minimum, but customers can always specify their
own exterior and interior mods. Check out the stats after the jump and
the images in the gallery below.

EDO Competition tweaks Ferrari Enzo to 700 hp

Edo Competition has no qualms about taking positively perfect exotic machinery and tweaking it to suit customer's tastes. And when it comes to the paragon of rolling automotive masterworks, the Ferrari Enzo is arguably King of the Hill.

While the Enzo isn't lacking in either the power or appearance department, that hasn't stopped Edo from making some subtle changes to the Enzo's exterior and powertrain. Edo began by replacing the intake with a revised ram-air system and a set of high-flow air filters, then worked its magic downstream with a set of headers similar to those in the FXX, along with a duo of high-flowing cats and a new exhaust system with remote-controlled, butterfly valves that allow the sound levels to be adjusted on the fly. All those bits are tuned through a modified ECU to produce 700 hp and 527 lb.-ft. of torque, which is sent through a heavy-duty clutch and on down to a retuned stock transmission that replicates the shift times of the FXX.

The Enzo's factory rolling stock has been replaced with 19x10-inch wheels in front and 20x13-inch wheels in the rear, wrapped in Michelin tires sized 265/35 R19 and 335/30 R20, respectively. The wheels can be custom painted to the customer's specs and a new suspension package, with adjustable compression and rebound, has been developed to mimic the setup found on the FIA GT MC12.

Edo claims that the sprint from 0 to 62 mph is estimated at 3.5 seconds and that the run from rest to 186 mph is dropped to 22 seconds flat. All the specs are available in the press release after the jump.

True targa-top Porsche 911 available from aftermarket

If you've been in the market for a vintage, or just affordable, Porsche 911 in the last ten years, you've undoubtedly noticed the number of Targa-topped 911s for sale. The reason for the glut of Targas is two fold: Porsche sold a slew of them in the 70s and 80s and they remain less desirable than their fixed-roof counterparts. However, the allure of the Targa hasn't been lost.

Porsche's introduction of the 911 Targa was largely a response to stringent safety regulations in the 1960s, but the appeal of both an open-air experience (without the aesthetic and noise issues of a traditional cloth convertible) and some manner of additional safety made the Targa a popular choice. Porsche reintroduced its modern interpretation of the Targa last year, but instead of the removable roof and fixed rollbar/B-pillar, it opted for a duo of sliding glass panels.

Paso Robles, California-based performance shop, VeloTech, has decided to move beyond its bread and butter business – turbocharging European vehicles – and has developed its own traditional targa setup for current 911s. The roof, which is comprised mainly of carbon fiber, is still a pricey solution for a very select group of enthusiasts, but VeloTech maintains that if the price for the conversion can be reduced from its current cost ($10,000) to something more palatable ($6,000), the market could expand.

Scooter-geek's dream ride: Yamaha Vino scooter, fully farkled

Though it's usually the adventure touring crowd that excels at turning their motorcycles into rolling technology test-beds, we've recently run across a Yamaha Vino scooter that has been fully farkled. Featuring an on-board computer based around a VIA mini ITX form factor motherboard that's cleverly been hidden under the stock Vino's seat, this rolling geek-mobile packs in WiFi, Bluetooth, USB, GPS, FM radio, a TV tuner and a front-mounted camera in its diminutive frame. With the full-spec computer, pretty much anything should be possible right from the road using this scooter. While this is certainly a cool project, we have a few questions regarding its durability. How long will the acrylic plate that makes the structure for the computer hold up? Perhaps most importantly, how long will the scooter's battery be able to power all this technology? In the name of science, of course, we graciously offer our services for a road trip on the machine to find the answer to these all-important questions. Thanks for the tip, jared!

AC Schnitzer does the 1-series cabrio

In typical AC Schnitzer fashion, the German tuner wasted no time getting to work on the new BMW 1-series cabrio. Then again, it didn't take much effort to port over the work AC did for the standard 1-series coupe to its softer, drop-top sibling. The ACS1 Cabrio package includes all the Schitzerfied exterior elements (new front bumper, rear bumper with diffuser and side skirts) and interior bits (silver carbon fiber trim, aluminum pedal and shifter, etc.) you'd expect. More importantly, AC is offering tuning packages for every model in the 1-series lineup, including the 135i, 120d and 123d. The two diesel mills get a bump in power to 200 hp and 240 hp respectively, with the 135i outputting 360 hp through the use of a revised exhaust and some ECU tweaks. Naturally, AC is offering up a plethora of wheel options, sized from 17- to 19-inches.

Apocalypse Preparation: Geiger Ford F650

When the fit hits the shan, we've got two phone calls to make: our Cayman Islands-based banker and Geiger cars. For 99,000 euro we can protect our loved ones while punching through some of the most wicked terrain this side of Dakar in the robust luxury of the German tuner's interpretation of the Ford F-650. Weighing in at 5.2-tons and stretching over 21-feet long, the Geigerfied uber-truck finds motivation from a tweaked 6.7-liter Cummins turbodiesel putting out 320 hp and 738 lb.-ft. of torque. Grunt is shoveled to a six-speed Allison 3000 automatic gearbox and on down to a biggie-sized driveshaft that powers the four, 22-inch rear wheels. Both the suspension and brakes are air-powered, and if we're willing to shell out a bit more cash, we can get chrome fuel tanks, leather, navigation and, surprisingly, gull-wing doors. We think this would compliment our imaginary post-apocalyptic stable that also includes our all-time favorite RV, the Wothahellizat.